The following table listsUniversal ZTNA known product issues. Issues are grouped according to ID prefix and sorted within their group with the most recently logged issue listed first. Issue IDs are in descending order.
| Issue Name | Description |
|---|---|
| CFD-11975 | Identity shows up as MAC address with EAP-TLS if Certificate is set to SAN | Email Address. |
| CFD-12203 | FQDN Applications are only retrieving the first A record of the application. |
| CFD-12357 | Universal ZTNA Apps in Agent are slow to connect. |
| UZ-2954 | Each Group Name that is imported or synced to Universal ZTNA must be unique. There are
frequent scenarios with Entra ID customers where they may have two of the same group
name because one is a Security Group and another is an Office 365 or Distribution
group. Entra ID allows this, however Universal ZTNA does not. If multiple groups with the same name attempt to be synchronized an error will occur in the synchronization. |
| UZ-3129 | Device login or posture failures are not reported on the insights table. |
| UZ-3171 | Applications with SSO enabled are not accessible through agentless web access. |
| UZ-3566 | Application Discovery will not work on first attempt. Attempt will timeout. A second attempt is required. |
| UZ-3818 | Network Resources connection prematurely closes before a response is sent. If anything in network resources page is out of sync, "Resync All" needs to be manually run to force a sync. |
| XCD-677 | If Universal ZTNA is set as the default application on the applications page,
XCD redirects to the wrong URL. Workaround: Don't select the Universal ZTNA application as the default application. |
| XCD-679 | License SKU description is not displayed on XCD user interface. |
| XIQ-36836 | Client table no longer showing "Unknown" as the OS Type MAC OS "Sequoia". |
| XIQ-36842 | For Limited Availability customers who are upgrading to General Availability: XIQ policies created prior to the upgrade will not see wireless clients populated in identities table. Work-around is to disable and enable the UZTNA slider and push the XIQ policy to the access point. |
| XIQ-33843 | EAP-TLS auth is not working with IDM in ExtremeCloud IQ. |
| ZTNA-15224 | No entries in activity log are created for actions performed in Device Posture admin screen. |
| ZTNA-21536 | Unregistered devices and network location conditions both show up stale SSIDs in the desktop agent and Universal ZTNA, respectively. |
| ZTNA-23480 | When using the agent and shifting from IPSec to Wireguard a delete and reinstall of the application is required. |
| ZTNA-27078 | For Limited Availability customers who are upgrading to General Availability: VLAN IDs show empty after upgrade, however VLAN assignment is still enforced as configured prior to upgrade. |
| ZTNA-27150 & ZTNA-27145 | Wireless authentication fails on SSIDs that have 'UZTNA Managed' and BYOD Enabled' enabled. |
| ZTNA-27147 | When new service connector build is rolled out, the upgrade service connector banner is not shown and the user is unable to upgrade to the latest build. Manual intervention is required. |
| ZTNA-27149 | macOS Sequoia 15.0.1 fails with error "Failed to configure ssid" when 'Click to Configure' is selected in the networks section of the agent. |